5.5.6 Tone Settings
Value Range
Default Value
Web User Interface Reference
RINGBACK_TONE_GAIN
Value Format
Description
Value Range
Default Value
RINGBACK_TONE_RPT
Value Format
Description
Value Range
Default Value
RINGBACK_TONE_TIMING
Value Format
Description
Value Range
Default Value
Web User Interface Reference
DIAL_TONE4_FRQ
Value Format
268
Administrator Guide
0, 200–2000 (0: No tone)
440,480
Tone Frequencies (Page 149)
Integer
Specifies the gain, in decibels, of the ringback tone.
(-80)–0
0
Boolean
Specifies whether the ringback tone is repeated.
•
Y (Repeat)
•
N (No Repeat)
Y
Comma-separated Integer
Specifies the pattern, in milliseconds, of ringback tones using up to 10
whole numbers (off 1, on 1, off 2, on 2...) separated by commas.
Note
•
It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).
0–16000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
60,2000,3940
Tone Timings (Page 149)
Integer
Document Version 2014-05