Synchronization Interval
Description
Value Range
Default Value
Configuration File Reference
NTP Server Address
Description
Value Range
Default Value
Configuration File Reference
Time Zone
Description
Value Range
Default Value
Configuration File Reference
4.4.5.2 Daylight Saving Time
Enable DST
Description
Value Range
Default Value
Configuration File Reference
DST Offset
Description
Value Range
Default Value
Configuration File Reference
Document Version 2014-05
Specifies the interval, in seconds, between synchronizations with the
NTP server.
10–86400
43200
TIME_SYNC_INTVL (Page 251)
Specifies the IP address or FQDN of the NTP server.
Max. 127 characters
Not stored.
NTP_ADDR (Page 250)
Selects your time zone.
GMT -12:00–GMT +13:00
GMT
TIME_ZONE (Page 220)
Selects whether to enable DST (Summer Time).
•
Yes
•
No
No
DST_ENABLE (Page 221)
Specifies the amount of time, in minutes, to change the time when
[Enable DST (Enable Summer Time)] is set to [Yes].
0–720
60
DST_OFFSET (Page 221)
4.4.5 Time Adjust Settings
Administrator Guide
105