Value Range
Default Value
Configuration File Reference
Voice Mail Access Number
Description
Value Range
Default Value
Configuration File Reference
Enable Shared Call
Description
Value Range
Default Value
Configuration File Reference
Document Version 2014-05
•
Yes
•
No
No
VM_SUBSCRIBE_ENABLE (Page 289)
Specifies the phone number used to access the voice mail server.
Note
•
Your phone system must support voice mail.
Max. 32 characters
Not stored.
VM_NUMBER (Page 290)
Selects whether to enable the Shared Call feature of the SIP server,
which is used to share one line among the units.
Note
•
You cannot set both [Enable Shared Call] and [Feature Key
Synchronization] to [Yes] at the same time.
•
Availability depends on your phone system.
•
Yes
•
No
Note
•
If you select [Yes], the SIP server will control the line by using
a shared-call signaling method. If you select [No], the SIP
server will control the line by using a standard signaling method.
No
SHARED_CALL_ENABLE (Page 291)
4.6.2 Call Control [Line 1]–[Line n]
Administrator Guide
131