4.5.1 SIP Settings [Line 1]–[Line n]
Default Value
Configuration File Reference
SRV lookup Prefix for UDP
Description
Value Range
Default Value
Configuration File Reference
SRV lookup Prefix for TCP
Description
Value Range
Default Value
Configuration File Reference
4.5.1.10 Transport Protocol for SIP
Transport Protocol
Description
Value Range
Default Value
Configuration File Reference
114
Administrator Guide
Yes
SIP_DNSSRV_ENA (Page 306)
Specifies a prefix to add to the domain name when performing a DNS
SRV lookup using UDP.
Note
•
This setting is available only when [Enable DNS SRV
lookup] is set to [Yes].
Max. 32 characters
_sip._udp.
SIP_UDP_SRV_PREFIX (Page 306)
Specifies a prefix to add to the domain name when performing a DNS
SRV lookup using TCP.
Note
•
This setting is available only when [Enable DNS SRV
lookup] is set to [Yes].
Max. 32 characters
_sip._tcp.
SIP_TCP_SRV_PREFIX (Page 306)
Selects which transport layer protocol to use for sending SIP packets.
•
UDP
•
TCP
•
TLS
UDP
SIP_TRANSPORT (Page 310)
Document Version 2014-05