Panasonic WV-SW559 Operating Instructions Manual page 61

Wv-sw550 series wv-sp500 series wv-sf540 series wv-sf530 series
Hide thumbs Also See for WV-SW559:
Table of Contents

Advertisement

Off/1pic/2pics/3pics/4pics/5pics
Default: Off
Note
When "1920x1080" is selected for the image capture size of the JPEG images to be saved, "4pics" and
"5pics" cannot be selected.
[Image saving interval/Number of images to be saved(Post alarm)] - [Image saving interval]
When "Alarm input" or "Manual" is selected for "Save trigger", select an interval (frame rate) of saving images
on the SD memory card from the following.
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps
Default: 1fps
Note
When "1920x1080" is selected for the image capture size of the JPEG images to be saved, "1fps"
cannot be selected.
[Image saving interval/Number of images to be saved(Post alarm)] - [Number of images to be
saved]
Select a number of alarm images to be saved on the SD memory card from the following.
10pics/ 20pics/ 30pics/ 50pics/ 100pics/ 200pics/ 300pics/ 500pics/ 1000pics/ 2000pics/ 3000pics
Default: 100pics
Note
When "H.264(1)" or "H.264(2)" is selected for "Recording format", "Pre alarm" and "Post alarm" can be
set on "H.264 recording" of [Alarm] tab.
"Number of images to be saved" can be configured only when "Alarm input" is selected for "Save
trigger".
[Image capture size]
When "Manual" is selected for "Save trigger" and "JPEG" is selected for "Recording format", select the image
capture size of the images to be saved on the SD memory card from the following.
When "2 mega pixel [16:9]" is selected for "Image capture mode"
1920x1080/640x360/320x180
When "1.3 mega pixel [16:9]" is selected for "Image capture mode"
1280x720/640x360/320x180
When "1.3 mega pixel [4:3]" is selected for "Image capture mode"
1280x960/VGA/QVGA
When "3 mega pixel [4:3]" is selected for "Image capture mode"
2048x1536 fix
Default: 640x360
Note
When "FTP error" is selected for "Save trigger", images will be saved with the image capture size
selected on the [FTP img. trans.] tab of the "Network" page.
When "H.264(1)" or "H.264(2)" is selected for "Recording format", select the image capture size for "H.
264 recording" - "Image capture size" on the [SD memory card] tab.
When "Alarm input" is selected for "Save trigger", images will be saved with the image capture size
selected on the [Alarm] tab of the "Alarm" page.
10 Configure the basic settings of the camera [Basic]
Operating Instructions
61

Advertisement

Table of Contents
loading

Table of Contents