Epson EB-465i Installation Manual page 22

Warning
❏
Never loosen the bolts and nuts after installation. Confirm that the screws have not
become loose on a regular basis. If you find any loose screws, tighten them firmly. If the
screws are not tightened firmly, the projector or setting plate may fall and cause personal
injury or property damage.
❏
Do not hang on the setting plate or hang a heavy object on the setting plate. If the
projector or setting plate falls, it could cause personal injury or property damage.
8. Appendix
Using the Easy Interactive Function
After you install an Easy Interactive Function compatible model (EB-465i/455Wi), you need to install the Easy
Interactive Driver and perform calibration (to align the positions of the cursor and Easy Interactive Pen).
For details, refer to the supplied Quick Start Guide or the User's Guide on the Document CD-ROM.
Attaching a Security Cable
If the projector is to be installed in a room where it will be left unattended, you can use a commercially
available theft-prevention wire lock to secure the projector to a post or other object to prevent someone from
taking it.
Pass the wire of the theft-prevention wire lock through the security cable installation point.
For details on how to lock the wire lock, refer to the User's Guide supplied with the wire lock.
22