Engine Oil Change - Honda EM5000is Owner's Manual

ENGINE OIL CHANGE

Drain the oil while the engine is warm to assure rapid and complete
draining.
1. Place a suitable container below the engine to catch the used oil,
and then remove the oil filler cap/dipstick, drain plug, and sealing
washer.
2. Allow the used oil to drain completely, and then reinstall the drain
plug and sealing washer. Tighten the plug securely.
Improper disposal of engine oil can be harmful to the environment.
If you change your own oil, please dispose of the used oil properly.
Put it in a sealed container, and take it to a recycling center. Do not
discard it in a trash bin, dump it on the ground, or pour it down the
drain.
3. With the generator in a level position, fill with the recommended oil
to the outer edge of the oil filler hole (see page
4. Screw in the oil filler cap/dipstick securely.
Wash your hands with soap and water after handling used oil.
OIL FILLER CAP/DIPSTICK
SERVICING YOUR GENERATOR
UPPER LIMIT
SEALING
WASHER
OIL DRAIN PLUG
48 ).
OIL FILLER CAP/
DIPSTICK
47