Pre-Operation Check; Engine Oil - Honda EX1000 Owner's Manual

PRE-OPERATION CHECK
ENGINE OIL
Engine oil is a major factor affecting engine performance and service
life. Non-detergent and P-stroke engine oils will damage the engine and
are not recommended.
Check the oil level BEFORE EACH
USE with the generator on a level sur-
face with the engine stopped.
Use 4-stroke motor oil that meets or
exceeds the requirements for API ser-
vice classification SF or SG. Always
check the API SERVICE label on the oil TEMP i2'
0
20 40 60
I I I I
I I ,
container to be sure it includes the
-30 -20 -10 0 10 20
30 40%
AMBIENT TEMPERATURE
letters SF or SG.
SAE low-30 is recommended for general use. Other viscosities shown in
the chart may be used when the average temperature in your area is within
the indicated range.
1. Remove the oil filler cap and wipe the dipstick clean.
2. Check the oil level by inserting the dipstick into the filler neck without
screwing it in.
3. If the oil level is low, fill to the top of the oil filler neck with the recommended
oil.
DIPSTICK
20