Honda EX1000 Owner's Manual page 20

An overloaded DC circuit, excessive current draw by the battery, or a wiring
problem will trip the DC circuit breaker (PUSH button extends out). If this
happens, wait a few minutes before pushing in the circuit breaker to resume
operation. If the circuit breaker continues to go OFF, discontinue charging
and see your authorized Honda generator dealer.
DISCONNECTING THE BAlTERY CABLES
1. Stop the engine,
2. Disconnect the negative (-) battery cable from the generator negative (-)
terminal.
3. Disconnect the other end of the negative (-) battery cable from the battery
negative (-) terminal.
4. Disconnect the positive (+) battery cable from the generator positive (+)
terminal.
5. Disconnect the other end of the positive (+) battery cable from the battery
positive (+) terminal.
6. Connect the vehicle ground cable to the battery negative (-) terminal.
POSITIVE
DC TERMINAL
(RED)
18