Specifications - Sharp XL-UR14H Operation Manual

Specifications

As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification
changes for product improvement without prior notice. The
performance specification figures indicated are nominal
values of production units. There may be some deviations
from these values in individual units.
■
General
Power source AC 220 - 240 V ~ 50/60 Hz
Power Power on: 26 W
consumption Power stand-by: 0.4 W (*)
Dimensions Width: 180 mm (7 - 3/32")
Height: 121 mm (4 - 49/64")
Depth: 239 mm (9 - 13/32")
Weight 1.70 kg (3.75 lbs.)
(*) This power consumption value is obtained when the
main unit is in stand-by mode.
■
Amplifier
Output power PMPO:
MPO: 30 W (15 W + 15 W) (10% T.H.D.)
RMS: 20 W (10 W + 10 W) (10% T.H.D.)
Output Speakers: 8 ohms
terminals
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Input terminals AUDIO IN (Analogue input):
500 mV/47 k ohms
■
CD player
Type Single disc multi-play compact disc
player
Signal Non-contact, 3-beam
readout
semiconductor laser pickup
D/A converter Multi bit D/A converter
Frequency 20 - 20,000 Hz
response
Dynamic 90 dB (1 kHz)
range
2012/ October/ 12_XL-UR14H_OM_EN.fm
17
■
USB
●
USB host Complies with USB 1.1 (Full
interface Speed)/ 2.0 Mass Storage Class.
●
Support Bulk only and CBI
protocol.
●
Support file MPEG 1 Layer 3
●
WMA (Non DRM)
●
Bitrate support MP3 (32 ~ 320 kbps)
●
WMA (64 ~ 160 kbps)
●
Other Maximum total number of MP3/
WMA files is 65280.
●
Maximum total number of folders
is 255 INCLUSIVE of root
directory.
●
The ID3TAG information
supported are TITLE, ARTIST and
ALBUM only.
●
Supports ID3TAG version 1 and
version 2.
●
File system Support USB devices with
support Microsoft Windows/DOS/FAT 12/
FAT 16/ FAT 32.
●
2 kbyte block length for sector.
●
Recording MPEG 1 LAYER 3 FORMAT.
●
Fixed Bitrate 128 kbps.
●
The ID3 TAG information is not
recorded.
■
Tuner
Frequency range FM: 87.5 - 108 MHz
■
Speaker
Type 2-way 2-speaker system
5 cm (2") tweeter
9 cm (3 - 35/64") woofer
Maximum input 20 W
power
Rated input power 10 W
Impedance 8 ohms
Dimensions Width: 110 mm (4 - 21/64")
Height: 195 mm (7 - 11/16")
Depth: 149 mm (5 - 7/8")
Weight 1.04 kg (2.29 lbs.)/each
E-20
EN