Sharp XL-UR14H Operation Manual page 241

Listening to a CD or MP3/WMA disc (continued)
■
Repeat play
Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Press the PLAY MODE button repeatedly until "REP ONE"
appears. Indicator 1 will light up. Press the
To repeat all tracks:
Press the PLAY MODE button repeatedly until "REP ALL"
appears. Indicator will light up. Press the
To repeat all desired tracks:
Perform steps 1 - 6 in "Programmed play" section on page
9 and then press the PLAY MODE button until "REP ALL"
appears. Indicator will light up. Press the
To cancel repeat play:
Press the PLAY MODE button again until "NORMAL"
appears. Indicator " 1" or "
■
Random play
The tracks on the disc can be played in random order
automatically.
To random play all tracks:
Press and hold down PLAY MODE button on the remote
control until "RDM ON" appears and "RDM" icon light up.
Press the / button.
To cancel random play:
Press and hold down the PLAY MODE button until "RDM
OFF" appears. "RDM" icon will disappear.
Notes:
●
During random playback, repeat function is not
possible.
●
Playback will stop after all the tracks is played
randomly.
●
If you press the button during random play, you can
move to the track selected next by the random opera-
tion. On the other hand, the
you to move to the previous track.
●
In random play, the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.)
2012/ October/ 12_XL-UR14H_OM_EN.fm
17
■
1
2
/ button.
3
/ button.
/ button.
Note:
If the track is skipped during playback, it means "Copyright
protected WMA file" or "Not supported playback file" is
selected.
" disappears.
■
To play back CD-R/RW.
1
2
3
4
button does not allow
E-8
Procedure to playback CD or MP3/WMA
disc with folder mode off
Select the CD function, and load a CD or an MP3/WMA
disc. After disc is loaded, disc info will be displayed.
Select desired file to be played back by pressing the
or button.
Press the / button. Playback will start.
●
Title, Artist and Album name are displayed if they are
recorded on the disc.
●
Display content can be changed by pressing the
(CLEAR)/DISP button.
Procedure to playback MP3/WMA disc with
folder mode on
Select the CD function, and load an MP3/WMA disc.
After disc is loaded, disc info will be displayed. Press the
FOLDER button.
TOTAL
indicator
Total number of files
Press the PRESET ( or ) button, to select desired
playback folder. (Folder mode on)
Folder number Total files in Folder 3
Select desired file to be played back by pressing the
or button.
Press the / button. Playback will start.
●
Folder name, File name, Title, Artist and Album
name are displayed if they are recorded on the disc.
●
Press the PRESET ( or
can be selected even though it is in playback mode.
It will continue playback mode in the 1st track of the
selected folder.
●
Display content can be changed by pressing the
(CLEAR)/DISP button.
Folder name display
Counter display
Album display
) button, and the folder
File name display
Title display
Artist display
EN