Pride Mobility Celebrity User Manual page 27

V I I I . D I S A S S E M B L Y A N D A S S E M B L Y
7. If you plan to remove the utility tray, disconnect the 6-pin motor harness plug. See figure 22. If you do not plan
to remove the utility tray, go to step 9.
NOTE: You can decrease the weight of the rear component by removing the utility tray.
8. (Optional) Lift up and remove the utility tray if you want to decrease the weight of the rear component. See
figure 23.
9. Pull up on and remove the front basket.
Figure 22. Disconnecting the Motor Harness
10. Grab the handle grip on the tiller, pull upward on the release lever, and gently lower the tiller down to the center
of the Celebrity chassis until it is fully lowered.
11. Remove the ball detent pins and lift the locking cam levers. See figures 24 and 25.
Figure 24. Removing Ball Detent Pins with Rings
Celebrity
Figure 23. Lifting the Utility Tray
Figure 25. Lifting Up Locking Cam Levers
29