V I I I . D I S A S S E M B L Y A N D A S S E M B L Y - Pride Mobility Celebrity User Manual

V I I I . D I S A S S E M B L Y A N D A S S E M B L Y

No tools are required to disassemble or assemble your Celebrity. Always disassemble or assemble your Celebrity
on a level, dry surface with sufficient room for you to work and move around your Scooter. Keep in mind that the
disassembled sections of the Celebrity take up more floor space than the assembled Celebrity.
DISASSEMBLY
You can disassemble the Celebrity into seven or eight pieces: the seat, the front frame, the front basket, the rear
frame, the rear shroud, and the two batteries; you can also remove the utility tray from the rear frame, if necessary.
Place your Scooter in an area where you have sufficient clearance to move the parts around. You need approximately
1.5 meters in all directions. You may need assistance to lift some of the Scooter components. See III. “Specifications”
for individual component weights.
1. Place the freewheel lever in the drive (down) position.
2. Push and hold down the seat lock lever to unlock it and lift the seat up and off of the Celebrity. See figure 16.
3. Gently lift the rear shroud off of the Celebrity. See figure 17. You will not be able to completely remove the rear
shroud because of the rear light harness connection.
Figure 16. Removing the Seat
Figure 17. Removing the Shroud
Celebrity 27