Pride Mobility Celebrity User Manual page 23

V I I . C O M F O R T
ARMREST HEIGHT ADJUSTMENT
You will need the following tools to adjust the height of the armrests:
n 5/32” hex key
n 1/8” hex key
n 7/16” wrench
1. Loosen the setscrew on the side of the height adjustment tube with the 1/8” hex key. See figure 14.
2. Loosen and remove the acorn nut and screw holding the height adjustment tube in place.
3. Raise or lower the height adjustment tube to the desired height.
4. Align the holes in the adjustment tube with the holes in the armrest upright.
5. Insert the screw through the holes in both the height adjustment tube and the armrest upright.
6. Install and tighten the acorn nut.
7. Tighten the setscrew on the side of the height adjustment tube.
8. Repeat for the other armrest.
POWER SEAT ACTUATOR (OPTIONAL)
Your Celebrity may be equipped with a power seat actuator. The actuator raises and lowers the seat automatically.
See figure 15.
WARNING! The power seat actuator is intended for operation only while the vehicle is stationary
and on a level surface. Its purpose is to aid you in reaching objects.
Strict adherence to the following safety rules is vital to your safety:
n
Do not attempt to raise or lower the seat while in motion!
n
Do not operate your Scooter with the power seat elevated!
n
Drive the vehicle only with the seat in the lowest position.
Celebrity
A D J U S T M E N T S
HEIGHT ADJUSTMENT TUBE
ACORN NUT
Figure 14. Armrest Height Adjustment
SETSCREW
ARMREST UPRIGHT
25