Pride Mobility Celebrity User Manual page 21

V I I . C O M F O R T
TILLER ANGLE ADJUSTMENT
You can adjust the tiller infinitely between the forward stop and the scooter deck.
WARNING! Remove the key before adjusting the tiller. Never attempt to adjust the tiller while the
Scooter is in motion.
1. Pull up on the tiller adjustment lever. See figure 11.
2. Move the tiller to a comfortable position.
3. Release the tiller adjustment lever. The tiller will remain in that position.
NOTE: In order to lower the tiller to the scooter deck, you must first remove the seat and both batteries.
See VIII. “Disassembly and Assembly.”
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to one of five different heights. See figure 12.
1. Remove the seat from your Celebrity. See VIII. “Disassembly and Assembly.”
2. Use the attached ring to pull and remove the ball detent pin from the seat post tower.
3. Raise or lower the seat post to the desired seat height.
4. Hold the seat post at that height and match up the holes in the seat post with the seat post tower.
5. Fully insert the ball detent pin.
6. Replace the seat.
Figure 11. Tiller Adjustment
Celebrity
TILLER ADJUSTMENT LEVER
A D J U S T M E N T S
SEAT POST
Seat Post Tower
SEAT POST TOWER
Figure 12. Seat Height Adjustment
BALL DETENT PIN
23