Patchwork Piecing; Patchwork - Janome Horizon MC8900 QCP Special Edition Instruction Book

q
e
q
w
w
q
q
e
w
r
q
w
q
e
w
r

Patchwork Piecing

Machine settings
q Pattern:
w Thread tension:
e Presser foot:
r Foot pressure:
Select pattern D95.
Place the patchwork pieces right sides together. Sew
while guiding the edge of the fabric along the guide on
the foot to keep a precise 1/4˝ seam allowance.
q Guide
w Right sides of the fabric
Angle scales on the needle plate
You can easily seam patchwork pieces at the desired
angle without marking, by using the angle scales on the
needle plate.
The angle scales are marked at 45, 60, 90 and 120
degrees.
Use the broken lines when piecing the patchwork pieces
with the 1/4˝ seam foot O as illustrated.
q Broken line
NOTE:
Use the solid lines when piecing the patchwork pieces
with the zigzag foot A. Align the edge of the fabric to
the 1/4˝ seam guide line.
w Solid line
e 1/4˝ seam guide line

Patchwork

Machine settings
q Pattern:
w Thread tension:
e Presser foot:
r Foot pressure:
* Stitch patterns
Open the seam flat with the right side up and sew
patchwork stitch along the seam line.
76
D94-D96, D95S or D96S
AUTO
1/4˝ seam foot O or
Zigzag foot A or
Dual feed foot AD
5
108
AUTO
Satin stitch foot F
5
can also be used.