Installation And Repairing; Installation Guide - Haier HW-12C03 Service Manual

11.INSTALLATION AND REPAIRIN
Installation Guide
The installation of air conditioner(only for reference)
1. Cut a wall hole or a window hole (see
Fig.1).
HW-09XX
HW-12XX
HW-18XX
2. Fix the iron support in a firm place with
expansible screws.
3. Take the air conditioner and its attachments
out from the packing carton.
4. Let the rear of the air conditioner raise
slightly, the drain hole on the bottom can
be seen.
Clog it with a black rubber stopper attached
to the air conditioner(see Fig.2)
5. Insert the drain connecting pipe (with a
seal circle) attached to the air conditioner
into the vertical drain hole on the bottom
(see Fig.3)
6. The condensate needing to be led to the
designated place, buy a soft plastic pipe
with internal diameter of 16mm to connect
the drain connecting pipe and tied it tightly
(see Fig.3)
7. All attachments being fixed, put the air
conditioner on the iron support. If there
is a drain hose, lead it to a required place
(see Fig.4) not for HW-18XXX.
A B
350 530
410 570
438 670
102
iron support
thickness of the wall
Fig.1
condenser
rubber
stopper
Fig.2
Fig.3
drain connecting
seal circle
drain hose
Fig.4
pipe