Haier HW-12C03 Service Manual page 100

Installation Guide
8. Chink the wall and window with soft
sponges or rubber bits in order to
refrain from outside noises coming
in or cooling air going out.
9. Air conditioner being fixed, insert the
power plug in the socket, open the
operation panel cover, turn the temperature
setting to
the mode selection to
cool Lo cool and Lo fan , turn
the auto swinging switch to
inspect the air conditioner's start and
running performance(see Fig.5)
10.If Test run
selection to
ature setting to
operation panel cover. Now the air
conditioner is ready for use.
The machine is adaptive in following situation
1.Applicable ambient temperature range:
Cooling
Heating
esp. For(T3) type. eg. HW-18C13(T3). applicable ambient temperature is invalid.
For cooling only type, heating temperature range is invalid.
2. If the supply cord is damaged. it must be replaced by the manufacturer or its
service agent or a similar qualified person.
3. After installation, the power plug should be easily reached.
4. The wiring method should be in line with the local wiring standard.
Test run turn successively
Hi fan
ON
is normal, turn mode
OFF turn the temper-
9 and close the
Maximum: D.B/W.B
Indoor side
Minimum: D.B/W.B
Maximum: D.B 43
Outdoor side
Minimum: D.B 18
Maximum: D.B 27
Indoor side
Minimum: D.B 15
Maximum: D.B/W.B
Outdoor side
Minimum: D.B/W.B
and Hi
to
103
wall
not for
HW-18XXX
drain hose
Fig.5
32 /23
18 /14
24 /18
-7 /-8