Antenna Power; System Setup - THOMSON THT504 User Manual

If By Channel is selected, use the cursor buttons to select Scan Band and Channel No. If By Frequency
is selected, use the cursor buttons to select Frequency and Bandwidth. Highlight Search and press
ok to start scanning. Newly found channels will be added to the channel list.

7.2.3 antenna power

pq
Use to select Installation, press ok or
pq
Use to select Antenna Power and press ok to enter.
Set to On if you use an active antenna.
Select Off for passive antennas.
When set to On, 5 V will be present on the ANT IN connector of the receiver.
Press eXIT to leave the Antenna Power menu.
7.2.4 lCn (logical Channel numbering)
If LCN (Logical Channel Numbering) is activated and an LCN signal is provided by the operator,
channels will be stored in an operator defined order. Set LCN to On to activate operator defined
channel numbering or Off to store channels in found order. This function only applies when a new
channel search is performed.

7.3 System Setup

This menu allows you to manage the system settings of your receiver. It consists of the following
sub-menus: Language, TV System, Local Time Setting, Timer Setting, Parental Lock, OSD Setting and
Auto Standby.
pq
Press to highlight the menu of choice and press ok advance to the next screen. Use
to move the highlight to the setting of choice. Values can be changed with
leave.
7.3.1 language
This menu allows you to set up your language preferences.
Language: Use
First Audio: Use
Second Audio: Use
selected at First Audio isn't available.
Subtitle Language : Use
Teletext: Use
Subtitle: Use
Select Normal, Hard of Hearing or Off*
* Availability of DVB/HoH subtitles depends on the broadcast. If such subtitles are not supported, then most likely
subtitles can be activated via Teletext if available.
p14
maIn menu
u
to advance.
tu
to select the language for the On Screen Display.
tu
to select Audio language.
tu
to select a language that will be played when the language
tu
to select the preferred subtitle language.
tu
to select the preferred Teletext language (when available).
tu
to select the preferred subtitle type to be displayed automatically.
pq
tu
. Press eXIT to