Usb Wake-Up; 10Gb Ethernet Enable/Disable - Supermicro X10SDV-TLN4F User Manual

USB Wake-Up

Use the JPUSB1 jumper to enable the
function of "System Waking-Up via USB
devices" for USB0/1. This jumper allows
you to "wake-up" the system by pressing
a key on the USB keyboard or by click-
ing the USB mouse of your system. The
JPUSB1 jumper is used together with
the USB Wake-Up function in the BIOS.
Enable both the jumper and the BIOS
setting to enable this function. See the
table on the right for jumper settings and
connections.

10Gb Ethernet Enable/Disable

JPTG1 is used to enable or disable
10Gb support. See the table on the
right for jumper settings.
JNVI2C1
SRW2
1
SRW1
BMC
AST2400
SLOT7
PCI-E3.0 X16
LEDM1
B
A
I-SATA1
I-SATA2
LED3
I-SATA4
VGA1
LAN3/4
LED8
X10SDV-TLN4F
REV:1.01
DESIGNED IN USA
CPU
J21
USB 4/5
JGPIO1
I-SGPIO1
JF1 I-SGPIO2
JPME1
2-31
USB Wake-up
Jumper Settings
Pin# Definition
1-2 Enabled (Default)
2-3 Disabled
10Gb Enable/Disable
Jumper Settings
Pin# Definition
1-2 Enabled (Default)
2-3 Disabled
A. USB Wake-up
B. 10Gb Ethernet Support
JPL1
i350
LAN1/2
JBT1
J6
FAN2
Chapter 2: Installation
PJ1