Usb Wake-Up - Supermicro Supero X8ST3-F User Manual

USB Wake-Up

Use JPUSB jumpers to "wake-up" your sys-
tem by pressing a key on a USB keyboard or
clicking the USB mouse of your system. The
JPUSB jumpers are used together with the
USB Wake-Up feature in the BIOS. Enable
both USB jumpers and the USB feature in
the BIOS to wake-up your system via USB
devices. See the table on the right for jumper
settings and jumper connections.
Note: JPUSB1 is used for Backpanel
USB ports #0/1, JPUSB2 is for Front
Panel USB por ts # 4/5, and # 6/ 7.
JPUSB3 is used for Front Accessible
USB Ports 2 and 3. When the USB func-
tion is set to Enabled in the BIOS, and a
USB Wake-up jumper is set to Disabled,
be sure to remove the USB devices
from the USB ports whose USB jumper
is Disabled before the system goes into
the standby mode. (The default setting
is Enabled.)
A
SMBUS_PS1
JPUSB1
JPW2
LAN CTRL
for IPMIl LAN
LAN
CTRL1
Intel Processor
LAN
CTRL2
FAN5
Slot6 PCI-E 2.0 X8 on X16
Slot5 PCI-E 2.0 X8
Slot4 PCI-E 2.0 X4 on X8
JPL1
JPL2
Slot3 PCI-E 2.0 X8
Slot2 PCI 33MHz
JBMC1
Slot1 PCI 33MHz
JI2C1
COM2 Floppy
BMC JTAG
DIMM3A
DIMM3B
DIMM2A
DIMM2B
DIMM1A
DIMM1B
Intel X58-Express
North Bridge
Battery
SPKR1
JBT1
JWOL
Intel ICH10R
South Bridge
I-Button
BMC
Firmware
JPG1
BMC CTRL
WPCM 450
3-SGPIO1
C
3-SGPIO2
JPUSB3
JI2C2
JPS2
USB2 USB3
JPUSB1 (BackPanel USB
0/1 Wake-up Enable)
Pin#
1-2
2-3
JPUSB2 (Front Panel USB
4/5, 6/7 Wake-up Enable)
Pin#
1-2
2-3
JPUSB3 (Front Panel USB
2, 3 Wake-up Enable)
Pin#
1-2
2-3
FAN1
JPW1
A. BP USB 0/1 Wake-up
CPU FAN
B. FP USB 4/5, 6/7 Wake-up
C. FP USB 2, 3 Wake-up
LE1
JOH
JWD
FAN2
JAR
B
SAS CTRL
LSI 1068E
JPUSB2
JL1
JPS1
FAN3
LES1
FAN4
2-31
Chapter 2: Installation
Definition
Enabled (Default)
Disabled
Definition
Enabled (Default)
Disabled
Definition
Enabled (Default)
Disabled