HP XP7 Configuration Manual page 155

Hide thumbs Also See for XP7:
Table of Contents

Advertisement

port
A physical connection that allows data to pass between a host and a disk array.
R-SIM
Remote service information message.
SIM
Service information message.
SNMP
Simple Network Management Protocol. A widely used network monitoring and control protocol.
Data is passed from SNMP agents, which are hardware and/or software processes reporting
activity in each network device (hub, router, bridge, and so on) to the workstation console used
to oversee the network. The agents return information contained in a MIB (Management Information
Base), which is a data structure that defines what is obtainable from the device and what can be
controlled (turned off, on, and so on).
SVP
Service processor. A computer built into a disk array. The SVP, used only by an HP service
representative, provides a direct interface to the disk array.
SVS
Storage Virtualization System, an appliance that manages multiple disk array storage systems.
TID
Target ID.
VCS
VERITAS Cluster Server.
volume
On the XP array, a volume is a uniquely identified virtual storage device composed of a control
unit (CU) component and a logical device (LDEV) component separated by a colon. For example
00:00 and 01:00 are two uniquely identified volumes; one is identified as CU = 00 and LDEV
= 00, and the other as CU = 01 and LDEV = 00; they are two unique separate virtual storage
devices within the array.
VSC
Volume size customization. Also known as CVS.
WWN
World Wide Name. A unique identifier assigned to a Fibre Channel device.
155

Advertisement

Table of Contents
loading

Table of Contents