Rear Seats; Split Folding Rear Seat - Chevrolet 2006 HHR Owner's Manual

To raise the seatback to an upright position, do the
following:
1. Pull up on one of the two levers located on the
rear of the seat near the bottom of either side of
the seat.
2. Push the seatback up until it is in a locked position.
CAUTION:
{
If the seatback is not locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
push and pull on the seatback to be sure it is
locked.
3. Push and pull on the seatback to make sure it is
locked.
1-10

Rear Seats

Split Folding Rear Seat

The seatbacks can be folded flat so that they are at the
same level as the rear cargo area. This allows more
cargo space.
To lower the rear seatback(s), do the following:
1. Move the front seat forward and/or put the front
seatback in an upright position so it does not
interfere with folding the rear seatback forward.
2. Open the rear door while the vehicle is parked.
3. The rear head restraint may need to be removed to
ensure that it does not interfere with the front seat
when the front seat is moved back in place.
If removed, store the head restraint where it cannot
move while the vehicle is in motion.
Notice: Folding a rear seat with the safety belts
still fastened may cause damage to the seat or the
safety belts. Always unbuckle the safety belts
and return them to their normal stowed position
before folding a rear seat.