Pass-Key Iii+ Operation - Chevrolet 2006 HHR Owner's Manual

Hide thumbs Also See for 2006 HHR:
Table of Contents

Advertisement

®
PASS-Key
III+ Operation
Your vehicle has PASS-Key
Automotive Security System) theft-deterrent system.
®
PASS-Key
III+ is a passive theft-deterrent system.
This means you do not have to do anything special to
arm or disarm the system. It works when you insert
or remove the key from the ignition.
®
When the PASS-Key
III+ system senses that someone
is using the wrong key, it prevents the vehicle from
starting. Anyone using a trial-and-error method to start
the vehicle will be discouraged because of the high
number of electrical key codes.
When trying to start the vehicle if the engine does not
start and the security light comes on, the key may
have a damaged transponder. Turn the ignition off
and try again.
If the engine still does not start, and the key appears
to be undamaged, try another ignition key. At this
time, you may also want to check the fuse, see
Fuses and Circuit Breakers on page 5-83.
2-20
®
III+ (Personalized
If the engine still does not start with the other key, your
vehicle needs service. If your vehicle does start, the
first key may be faulty. See your dealer who can service
®
the PASS-Key
III+ to have a new key made. In an
emergency, contact Roadside Assistance. See Roadside
Assistance Program on page 7-6, for more information.
It is possible for the PASS-Key
"learn" the transponder value of a new or replacement
key. Up to 10 keys may be programmed for the vehicle.
The following procedure is for programming additional
keys only. If all the currently programmed keys are
lost or do not operate, you must see your dealer or a
locksmith who can service PASS-Key
made and programmed to the system.
See your dealer or a locksmith who can service
®
PASS-Key
III+ to get a new key blank that is cut
exactly as the ignition key that operates the system.
To program the new key do the following:
1. Verify that the new key has a
2. Insert the already programmed key in the ignition
and start the engine. If the engine will not start,
see your dealer for service.
®
III+ decoder to
®
III+ to have keys
1
stamped on it.

Advertisement

Table of Contents
loading

Table of Contents