Table of Contents
Advertisement
POWER SEATS
POWER SEAT ADJUSTMENTS
A. Seat Adjustment
Move the horizontal control to move the seat
forward or rearward and to tilt, raise or lower
the seat.
B. Seatback Recline Adjustment
Move the vertical control to recline or raise
the seatback.
C. Lumbar Support Adjustment
Press and hold the round control to adjust
the amount of lumbar support.
MEMORY SEATS
1. Adjust the seat and power outside mirrors.
2. Press and release the SET button; a beep will sound.
3. Immediately press and hold button 1 or 2 until two beeps sound.
To store a seat position for when exiting the vehicle, repeat these steps using the
Exit button.
RECALL MEMORY POSITIONS
Press and hold button 1, 2, or
For automatic recall, go to Settings > Vehicle > Seating Position > Seat Entry Memory
and Seat Exit Memory.
REAR SEATS
RECLINING THE REAR SEAT
Pull the lever (A) on top of the seatback and
move the seatback to the desired position.
Release the lever.
FOLDING THE REAR SEAT
1. Press the button on the head restraint. It will
fold automatically.
2. Pull the lever (A) on top of the seatback —
a tab near the lever is visible when the seat-
back is unlatched — and fold the seatback
forward.
From the cargo area, pull the top lever
( passenger's side seat) or bottom lever
( driver's side seat) located on the passen-
ger's side of the cargo area to fold either seatback.
3. Stow the seat belt in the belt clip.
6
Optional equipment
F
F
Exit.
See Seats and Restraints in your Owner's Manual.
(B)
F
(C)
F
See Seats and Restraints in your Owner's Manual.
A
B
C
A
B
C
Advertisement
Table of Contents
