Daily Maintenance; Weekly Maintenance; Monthly Maintenance - Husqvarna K950 RING Operator's Manual

2
2
Below follows some general maintenance instructions.
If you need further information please contact your service
workshop.

Daily maintenance

1. Check that throttle components work correctly from a safety
view point (throttle and starter throttle catch).
2. Check engagement roller wear daily.
3. Check support roller for wear twice a week.
4. Check the condition of the cutting blade and drive disc.
5. Check the condition of the bladeguard.
6. Check the starter and the starter cord; clean the outside of
the starter's air intake.
7. Check that all nuts and bolts are tightened correctly.
8. Check the function of the stop switch.

Weekly maintenance

9. Check and clean the main filter.
10. Check the tension of the drive belt.
11. Clean the spark plug. Check that the electrode gap is 0.5
mm.
12. Clean the cooling fins on the flywheel. Check the starter
and recoil spring.
13. Clean the cooling fins on the cylinder.
14. Check the muffler.
15. Check and clean waterdisc and water inlet screen.
22
– English
MAINTENANCE
5
3
4
3
6
14
13
20 12
16

Monthly maintenance

16. Check the clutch drum, drive-pulley, and clutch springs with
regard to wear.
17. Clean the outside of the carburetor
18. Check the fuel filter, fuel hose, change if necessary.
19. Clean the inside of the fuel tank.
20. Check all cables and connections.
9
11
17
1
8
18 19
15
10