Emission Control Warranty Statement; Your Warranty Rights And Obligations - Husqvarna K950 RING Operator's Manual

EMISSION CONTROL WARRANTY STATEMENT

YOUR WARRANTY RIGHTS AND
OBLIGATIONS
The EPA (The US Environmental Protection Agency),
Environment Canada and Partner Industrial are pleased to
explain the emissions control system warranty on your 2002
and later small non-road engine. In U.S. and Canada, small
non-road engines must be designed, built and equipped to
meet the federal stringent anti-smog standards. Partner
Industrial must warrant the emission control system on your
small non-road engine for the periods of time listed below
provided there has been no abuse, neglect or improper
maintenance of your unit. Your emission control system
includes parts such as the carburetor and the ignition
system.
Where a warrantable condition exists, Partner Industrial will
repair your small non-road engine at no cost to you.
Expenses covered under warranty include diagnosis, parts
and labor.
MANUFACTURER'S WARRANTY
COVERAGE
All 2002 and later small non-road engines are warranted for
two years. If any emission related part on your engine (as
listed above) is defective, the part will be repaired or
replaced by Partner Industrial.
OWNER'S WARRANTY
RESPONSIBILITIES
As a small non-road engine owner, you are responsible for
the performance of the required maintenance listed in your
Operator's Manual. Partner Industrial recommends that you
retain all receipts covering maintenance on your small non-
road engine, but Partner Industrial cannot deny warranty
solely for the lack of receipts or for your failure to ensure the
performance of all scheduled maintenance.
As a small non-road engine owner, you should, however, be
aware that Partner Industrial may deny you warranty
coverage if your small non-road engine or a part of it has
failed due to abuse, neglect, improper maintenance,
unapproved modifications or the use of parts not made or
approved by the original equipment manufacturer.
You are responsible for presenting your small non-road
engine to a Partner Industrial authorized servicing dealer as
soon as a problem exists. The warranty repairs should be
completed in a reasonable amount of time, not to exceed 30
days.
If you have any questions regarding your warranty rights and
responsibilities, you should contact your nearest authorized
servicing dealer or call Partner Industrial at 1-800 323 3553.
WARRANTY COMMENCEMENT DATE
The warranty period begins on the date the small non-road
engine is delivered.
LENGTH OF COVERAGE
Partner Industrial warrants to the initial owner and each
subsequent purchaser that the engine is free from defects in
materials and workmanship which cause the failure of a
warranted part for a period of two years.
WHAT IS COVERED
REPAIR OR REPLACEMENT OF PARTS
Repair or replacement of any warranted part will be perfor-
med at no charge to the owner at an approved Partner
Industrial servicing dealer. If you have any questions
regarding your warranty rights and responsibilities, you
should contact your nearest authorized servicing dealer or
call Partner Industrial at 1-800 323 3553.
WARRANTY PERIOD
Any warranted part which is not scheduled for replacement
as required maintenance, or which is scheduled only for
regular inspection to the effect of "repair or replace as
necessary" shall be warranted for 2 years. Any warranted
part which is scheduled for replacement as required
maintenance shall be warranted for the period of time up to
the first scheduled replacement point for that part.
DIAGNOSIS
The owner shall not be charged for diagnostic labor which
leads to the determination that a warranted part is defective,
if the diagnostic work is performed at an approved Partner
Industrial servicing dealer.
CONSEQUENTIAL DAMAGES
Partner Industrial may be liable for damages to other engine
components caused by the failure of a warranted part still
under warranty.
WHAT IS NOT COVERED
All failures caused by abuse, neglect or improper
maintenance are not covered.
ADD-ON OR MODIFIED PARTS
The use of add-on or modified parts can be grounds for
disallowing a warranty claim. Partner Industrial is not liable
to cover failures of warranted parts caused by the use of
add-on or modified parts.
HOW TO FILE A CLAIM
If you have any questions regarding your warranty rights and
responsibilities, you should contact your nearest authorized
servicing dealer or call Partner Industrial at 1-800 323 3553.
WHERE TO GET WARRANTY SERVICE
Warranty services or repairs shall be provided at all Partner
Industrial authorized servicing dealers.
MAINTENANCE, REPLACEMENT AND
REPAIR OF EMISSION-RELATED PARTS
Any Partner Industrial approved replacement part used in
the performance of any warranty maintenance or repairs on
emission-related parts, will be provided without charge to the
owner if the part is under warranty.
EMISSION CONTROL WARRANTY PARTS
LIST
1. Carburetor and internal parts
2. Intake pipe, airfilter holder and carburetor bolts.
3. Airfilter and fuelfilter covered up to maintainance
schedule.
4. Ignition System
a) Spark Plug, covered up to maintenance schedule
b) Ignition Module
MAINTENANCE STATEMENT
The owner is responsible for the performance of all required
maintenance, as defined in the operator's manual.
25
English –