Table of Contents
Advertisement
34
REMOTE CONTROL
Registering Magic Motion Re-
mote Control
The Magic Motion Remote Control operates by
pairing with your TV.
Register the Magic Motion Remote Control to use.
How to register the Magic Motion Remote
Control
To register the remote control, press the OK button
on the remote control while aiming it at your TV.
How to Re-register the Magic Motion Remote
Control after Registration Failure
Reset the remote control by pressing and holding
both the OK and MUTE buttons for 5 seconds.
(Once the reset is complete, the light on the
Pointer blinks.) Then repeat the above procedure
to register the remote control.
How to use Magic Motion Re-
mote Control
1
Press OK button if there is no pointer on your
TV screen. The pointer will then appear on the
screen.
If the pointer has not been used for a certain
period of time, it will disappear.
2
You can move the pointer by aiming the Pointer
Receiver of the remote control at your TV then
move it left, right, up or down.
If the pointer does not work properly after click-
ing the OK button, leave the remote control for
10 seconds then use it again.
Precautions to Take when Using
the Magic Motion Remote Control
Use the remote control within the maximum
y
y
communication distance (10 m). Using the
remote control beyond this distance, or with
an object obstructing it, may cause a com-
munication failure.
A communication failure may occur due to
y
y
nearby devices. Electrical devices such as
a microwave oven or wireless LAN product
may cause interference, as this will use the
same bandwidth (2.4 GHz) as the Magic Mo-
tion Remote Control.
The Magic Motion Remote Control may be
y
y
damaged or may malfunction if it is dropped
or receives a heavy impact.
When playing a game using the Magic
y
y
Motion Remote Control, hold it securely by
wrapping its strap around your wrist and
adjusting the length with the adjustable ring.
Take care not to bump into nearby furniture
y
y
or other people when using the Magic Motion
Remote Control.
Manufacturer and installer cannot provide
y
y
service related to human safety as the ap-
plicable wireless device has possibility of
electric wave interference.
It is recommended that an Access Point
y
y
(AP) be located more than 1 m away from
the TV. If the AP is installed closer than 1
m, the magic motion remote control may
not perform as expected due to frequency
interference.
VOL
INPUT
MENU
ENTER
CH
Hide quick links:
Advertisement
Table of Contents
