Only 50/60PZ57 ** , 50/60PZ95 **
1
Install the Power Cord Holder and Power
Cord. It will help prevent the power cable from
being removed by accident.
2
Gather and bind the cables with the Cable
Holder. Install the LAN cable as shown to
reduce the electromagnetic wave.
CAUTION
Do not move the TV by holding the Cable
y
y
Holder & Power Cord Holder, as the Cable
holders may break, and injuries and damage
to the TV may occur.
Power Cord Holder
Cable Holder
ASSEMBLING AND PREPARING
Not using the Desk-Type Stand
Only 50/60PZ57 ** , 50/60PZ95 **
When installing the wall mounting bracket,
y
y
use the Protection cover. This will protect the
opening from accumulating dust and dirt.
1
Push the supplied protection cover into the
opening at the bottom of the TV until it locks in
place.
2
Attach the protection tape as shown in the
figure below to keep the protection cover
secure while moving the TV set.
Protection tape
29
Protection cover