Using Additional Options; Adjusting Aspect Ratio - LG 32LV3710-TB Owner's Manual

42
WATCHING TV

Using additional options

Adjusting aspect ratio

Resize an image to view at its optimal size by
pressing RATIO while you are watching TV.
NOTE
You can also change the image size by
y y
pressing Q. MENU or accessing Aspect
Ratio in the PICTURE menus.
You can adjust the enlarge proportion using
y y
the Navigation buttons.
You can only select 4:3, 16:9 (Wide), 14:9,
y y
Cinema Zoom in Component mode.
You can only select 4:3, Original, 16:9
y y
(Wide), 14:9, Cinema Zoom in HDMI mode.
You can only select 4:3, 16:9 (Wide) in RGB-
y y
PC, HDMI-PC mode only.
In DTV/HDMI/Component (over 720p) mode,
y y
Just Scan is available.
In DTV(over 576p) mode, Just Scan is avail-
y y
able in Australia only.
-
16:9: Resizes images to fit the screen width.
-
Just Scan: Displays video images in the origi-
nal size without removing parts of the edge of
the image.
Just Scan
NOTE
If you select Just Scan, you may see image
y y
noises at the edge or edges of the screen.
-
Original: When your TV receives a wide
screen signal it will automatically change to the
picture format broadcasted.
or
Original
-
Full Wide(Only DTV): When TV receives the
wide screen signal,it will let you adjust the
picture horizontally or vertically, in a linear
proportion,to fill the entire screen fully.
4:3 and 14:9 video is supported in full screen
without any video distortion through DTV
input.
Full Wide
or
-
4:3: Resizes images to the previous standard
4:3.
Original
Full Wide