Wall Mounting Bracket Installation - LG 32LV3710-TB Owner's Manual

Wall mounting bracket installa-
tion
Only 47/55LZ96 **
1
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
2
Fasten the screws to mount the Wall Mount-
ing Bracket for the set and the Set Protection
Brackets to the TV set.
Screw for assembly
M4 x 7
M4 x 14
3
Mount the Wall Mounting Bracket to the place
you want using the Wall Anchors and Screws
as shown below. You can adjust the level of the
Wall Mounting Bracket with the level gauge
attached.
Wall Anchor
Number of screws
2
2
Screw
ASSEMBLING AND PREPARING
3-1
Drill holes with depth of 80 mm - 100 mm at
the anchor location with a 8 mm drill bit.
3-2
Clean the drilled holes.
3-3
Insert the Wall Anchor provided in the hole.
3-4
Push the Wall Mounting Bracket to the wall
aligning with the hole. Make sure that the angle
adjusting knob is located on the upper side of
the Wall Mounting Bracket.
3-5
Screw the Screw for the Wall Mounting
Bracket into the hole. At this time, fasten the
Screw applying a torque of at least 45 kgf•cm.
27