D-Link DWL-3200AP User Manual page 28

DWL-300AP User's Manual
Fragment Length:
RTS Length:
Transmit Power:
Super G Mode: Super G is a group of performance enhancement features that
Praemble: Select the default value Short and Long, or Long Only.
Wireless B/G Mode: This function allows you to conigure the wireless network with IEEE
Antenna Diversity: The DWL-300AP supports .4GHz radio with two antennas. Radio
D-Link Systems, Inc.
The fragmentation threshold, which is speciied in bytes, determines
whether packets will be fragmented. Packets exceeding the 346
byte setting will be fragmented before transmission. 346 is the
default setting
This value should remain at its default setting of 346. If you
encounter inconsistent data low, only minor modiications to the
value range between 56 and 346 are recommended
Choose full, half (-3dB), quarter (-6dB), eighth (-9dB), minimum
power.
increase end user application throughput in an 80.11g network.
Super G is backwards compatible to standard 80.11g devices.
For top performance, all wireless devices on the network should be
Super G capable. Select either Disabled, Super G without Turbo,
or Super G with Dynamic Turbo.
Disabled: Standard 80.11g support, no enhanced capabilities.
Super G
without Capable of Packet Bursting, FastFrames, Compression,
and no Turbo mode.
Turbo:
Super
Capable of Packet Bursting, FastFrames, Compression,
G with
and Dynamic Turbo. This setting is backwards compatible
Dynamic
with non-Turbo (legacy) devices. Dynamic Turbo mode is
Turbo:
only enabled when all devices on the wireless network are
conigured with Super G with Dynamic Turbo enabled.
Radio:
Select On or Off.
WMM: Select Enable or Disable, Disable is selected by default. WMM
stands for Wi-Fi Multimedia, by enabling this feature it will improve
the user experience for audio and video applications over a Wi-Fi
network.
80.11g only, IEEE 80.11b only, or IEEE 80.11g with backward
interoperability with IEEE 80.11b.
is connected to each antenna and supports auto diversity mode by
default. This means that the access point will auto switch to the
antenna with better RSSI value.
Using the Coniguration Menu
8