Connecting Poe (Power Over Ethernet) - D-Link DWL-3200AP User Manual

DWL-300AP User's Manual

Connecting PoE (Power over Ethernet)

Connect one end of an Ethernet cable (included with your package) to the
Step 1
LAN port on the DWL-300AP and the other end of the Ethernet cable to the
port labeled P+DATA OUT on the PoE base unit.
Connect another Ethernet cable from the DATA IN port on the PoE base
Step 2
unit to your router/switch, using a straight through cable, or to a PC, using a
crossover cable.
Attach the power adapter to the connector labeled POWER IN on the PoE
Step 3
base unit. Attach the power cord to the power adapter and into an electrical
outlet.
D-Link Systems, Inc.
Getting Started
1