Connecting Poe (Power Over Ethernet) - D-Link AirPremier DWL-00AP Manual

Connecting PoE (Power over Ethernet)

Connect one end of an Ethernet cable (included with your pack-
Step 1
age) to the LAN port on the DWL-00AP and the other end of
the Ethernet cable to the port labeled P+DATA OUT on the PoE
base unit.
Connect another Ethernet cable from the
Step 2
PoE base unit to your router/switch, using a straight through
cable, or to a PC, using a crossover cable.
Attach the power adapter to the connector labeled POWER IN on
Step 3
the PoE base unit. Attach the power cord to the power adapter
and into an electrical outlet.

DATA IN
port on the