Yamaha AVENTAGE RX-A550 Owner's Manual page 74

Menu Item
DSP Parameter
Sound
Lipsync
Volume
Auto Power Standby
ECO
ECO Mode
Input Rename
Input Skip
Function Dimmer
Memory Guard
Remote Color Key
Information
Network Connection
IP Address
MAC Address Filter
Network
DMC Control
Network Standby
Network Name
Network Update
Bluetooth
Bluetooth Audio Receive
Bluetooth Standby
Language
Function
CINEMA DSP 3D Mode Enables/disables CINEMA DSP 3D.
Panorama Enables/disables the broadening effect of the front sound field.
Center Width Adjusts the broadening effect of the center sound field.
Dimension Adjusts the difference in level between the front and surround sound fields.
Center Image Adjusts the center orientation level (broadening effect) of the front sound field.
Select Selects the method to adjust the delay between video and audio output.
Adjustment Adjusts the delay between video and audio output manually.
Scale Switches the scale of the volume display.
Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback.
Max Volume Sets the maximum volume to prevent excessive loudness.
Initial Volume Sets the initial volume for when this receiver is turned on.
Set the amount of time for the auto-standby function.
Enables/disables the eco mode (power saving mode).
Changes the input source name displayed on the front display.
Set which input source is skipped when operating the INPUT key.
Adjusts the brightness of the front display.
Prevents accidental changes to the settings.
Set the unit's functions for the RED/GREEN/YELLOW/BLUE key of the remote control.
Displays the network information on the unit.
Selects the network connection method.
Configures the network parameters (such as IP address).
Sets the MAC address filter to limit access to the unit from other network devices.
Selects whether to allow a DLNA-compatible Digital Media Controller (DMC) to control playback.
Selects whether to enable/disable the function that turns on the unit from other network devices.
Edits the network name (the unit's name on the network) displayed on other network devices.
Updates the firmware via the network.
Enables/disables the BLUETOOTH functions.
Disconnect Terminates the BLUETOOTH connection between the BLUETOOTH device (such as smartphones) and the unit.
Selects whether to enable/disable the function that turns on the unit from BLUETOOTH devices (BLUETOOTH standby).
Select an on-screen menu language.
74
En
Page
80
80
80
80
80
81
81
81
81
81
81
82
82
83
83
83
83
84
85
85
85
86
86
86
86
87
87
52
87
88