Xx Waste Toner Bottle Nearly Full; Xx Transfer Module Missing - Lexmark X950 Series User Manual

Troubleshooting

82.xx Waste toner bottle nearly full

Order a replacement waste toner bottle immediately.
1
Replace the waste toner bottle.
For instructions on installing the waste toner bottle, from the printer control panel touch More Information.
2
Touch Continue to clear the message and continue printing.
84 unsupported [color] photoconductor
Remove the specified photoconductor, and then install a supported one.
84.xx [color] photoconductor missing
Install the specified color photoconductor, following the instruction sheet that came with the replacement part.
84.xx [color] photoconductor nearly low
1
Order a replacement photoconductor.
2
When print quality is reduced, install the new photoconductor, following the instruction sheet that came with the
replacement part.
3
Touch Continue to clear the message and continue printing.
84.xx [color] photoconductor low
1
Order a replacement photoconductor immediately.
2
When print quality is reduced, install the new photoconductor, following the instruction sheet that came with the
replacement part.
3
Touch Continue to clear the message and continue printing.

83.xx Transfer module missing

Insert the transfer module into the printer.
84.xx Replace [color] photoconductor
1
Replace the photoconductor, following the instruction sheet that came with the replacement part.
2
From the printer control panel, touch Continue to clear the message and continue printing.
88.2x Replace [color] cartridge
The specified toner cartridge is empty.
1
Replace the specified toner cartridge.
2
Touch Continue to clear the message and continue printing.
290