Quality Menu - Lexmark X950 Series User Manual

Understanding the printer menus

Quality menu

Use
Print Mode
Color
Black Only
Color Correction
Auto
Off
Manual
Print Resolution
1200 dpi
2400 Image Q
Toner Darkness
1–5
Enhance Fine Lines
On
Off
Color Saver
On
Off
RGB Brightness
‑6 to 6
RGB Contrast
0–5
RGB Saturation
0–5
Color Balance
Cyan
‑5 to 5
Magenta
‑5 to 5
Yellow
‑5 to 5
Black
‑5 to 5
Reset Defaults
To
Specify whether to print images in color.
Note: Color is the factory default setting.
Adjust the color output on the printed page.
Note: Auto is the factory default setting.
Specify the output resolution in dots per inch (dpi) or in image quality.
Note: 2400 Image Q is the factory default setting.
Lighten or darken the output.
Note: 3 is the factory default setting.
Enable a print mode preferable for files such as architectural drawings, maps, electrical
circuit diagrams, and flow charts.
Note: Off is the factory default setting.
Reduce the amount of toner used for graphics and images.
Notes:
• Off is the factory default setting.
•
On overrides the Toner Darkness setting.
Adjust the brightness of the output.
Note: 0 is the factory default setting.
Adjust the contrast of the output.
Note: 0 is the factory default setting.
Adjust saturation in color outputs.
Note: 0 is the factory default setting.
Enable an equal balance of colors in the output.
Note: 0 is the factory default setting.
208