Atm Output - Alcatel-Lucent 7750 SR OS Interface Configuration Manual

Show Commands
Local IPv4 address : 0.0.0.0
Local IPv6 address : ::
Remote IPv6 address: ::
Line Monitor Method: keepalive
Keepalive statistics
Request interval
Drop Count
Time to link drop
Last cleared time
PPP Header Compression
===============================================================================
*A:top_SR7#
ATM Output — The following table describes ATM output fields.
Page 372
: 4
: 3
: 00h00m12s
: 05/22/2008 06:28:48
ACFC : Enabled
Label
Cell Mode
Configured VCs
Max Supported
VCs
Interface Oper
Status
Number OCD
Events
TC Alarm State
Last Unknown
VPI/VCI
Ingress CBR
Egress CBR
Ingress RT-VBR
Remote IPv4 address: 0.0.0.0
Threshold exceeded : 0
In packets
Out packets
PFC
Displays the cell format (UNI or NNI) that is used on the ATM inter-
face.
Displays the number of configured VCs.
Indicates the maximum number of ATM VPCs that can be configured
on this MDA.
Indicates the status of the ATM interface. If the SONET-PATH layer
and TC sublayer are operationally up, the ATM Interface is considered
up. If the SONET-PATH layer and/or TC SubLayer is down, the ATM
Interface is set to lowerLayerDown.
Displays the number of times the Out of Cell Delineation (OCD) events
occurred
Displays notifications that are generated when the ATM interface indi-
cates that the TC sublayer is currently in the Loss of Cell Delineation
(LCD) defect maintenance state or when the TC sublayer is currently
not in the Loss of Cell Delineation (LCD) defect maintenance state.
Indicates the last unknown VPI/VCI that was received on this interface.
Indicates the total CBR bandwidth consumed on this interface in the
ingress direction.
Indicates the total CBR bandwidth consumed on this interface in the
egress direction.
Indicates the total real-time variable bit rate (rt-VBR) bandwidth con-
sumed on this interface in the ingress direction.
7750 SR OS Interface Configuration Guide
: 46418
: 46418
: Enabled
Description