Mx-Fxx1 (Facsimile Expansion Kit) - Sharp MX-5500N Installation Manual

[13] MX-FXX1
MX-7000N
1. Unpacking
A. Pulling out of the fax box unit
B. Check the packed items
1) Check that all the items are included in the package.
1
4
No. Names of bundles
1 Line cable
2 Step screw A
3 Step screw B (Not used for this main unit)
4 FAX memory
5 Ferrite core
(Not used
for this main unit)
2 3
5
Quantity
1
1
1
1
1
MX-7000N MX-FXX1 13 – 1
* The fax box unit without the mark "N" for identification includes
Service Manual
only the step screw (Package part No.3) not for installation.
Therefore, when installing, prepare the service parts (LX-
BZ1088FCZZ) in advance.
The fax box unit with the mark for identification includes the step
screw (Package part No. 2) for installation. Therefore, use it.
* About the fax box unit without the mark "D" for identification,
upgrade of the FAX (MAIN) version to 01.03.00 or later is
required.
2. Installation
<Note before installation>
* Start installation after checking that the LINE indicator and the
DATA indicator below it on the operation panel are neither lit nor
blinking.
A. Turn OFF the power of the main unit
1) Turn the power switch located on the operation panel to the
"OFF" position.
2) After checking that the operation panel has gone out, open the
front cabinet and turn the main power switch to the "OFF" posi-
tion.
N D
Mark for identification
"OFF"
"OFF"