Epson TM-T20II Software User Manual page 68

TM-T20II Software Installer
C
The Logo Edit screen appears. Edit the logo image while checking the image previewed on the upper portion of
the screen. When finished, click the OK button.
You can edit the followings.
Setting
Image width
Resize
Half toning
Brightness
Density
D
If the logo mode is First Key-code Selection Mode and Automatically set the keycode for the logo to be
stored. is not turned on, the Key-code Settings screen is displayed. Set a Key-code and click the OK button.
If the logo mode other than First Key-code Selection Mode is selected or Automatically set the keycode for
the logo to be stored. is turned on, the Key-code Settings screen is not displayed.
E
The logo data is added on the list. When storing multiple logo data, repeat Step 1 through 4.
Software User's Manual
TM-T20II Utility
Description
Specifies the width to which the image is resized (in mm).
Specifies whether or not the image is resized. If the image width is greater
than the paper width and resizing is not specified, the part of the image
that exceeds the paper width will be cut off.
Configures the halftone setting of the image.
Configures the brightness of the image.
Configures the printing concentration.
68