Epson TM-T20II Software User Manual page 65

TM-T20II Software Installer
This section describes how to configure logos to be stored on the printer. The utility allows you to print your logo
already stored on the printer, but you cannot edit and restore it as a file. When using the OPOS to store your logo, U
see "Storing Logos" on page
Storing Logos has the following functions.
Setting
Key Code List
Add
Edit
Delete
Test print
Change Logo Mode
Key-code Management
Preview
Logo Indicator
Save to File
Store to Printer
Software User's Manual
TM-T20II Utility
86.
Description
Displays the logos registered in the printer and the logos to be added in the
printer. The logos registered in the printer have
Key-code.
Adds logo data on the list.
Edits the halftone and brightness settings of the selected logo data.
Deletes the selected logo data from the list or deletes logos stored on the printer.
Prints the selected logos.
Displays Select Mode for Storing Logo screen.
Displays Key-code Management screen.
Displays the logo image to be stored on the printer. Logo images stored on the
printer are not displayed.
Indicator: Registerable memory size in the printer for logos
Additional logo data: Size of logos displayed on the list
Used amount: Size of registered logos
Saves the configured logo data as a file to store it to the printer. The data can also
be stored as a bmp file.
Stores the configured logo data to the printer.
65
at the beginning of the