Epson TM-T20II Software User Manual page 48

TM-T20II Software Installer
C
Select the position where the logo is printed.
Select the printing position from Start of Document / End of Document / Start of Page / End of Page.
D
Click Select Image to specify the logo to print.
E
The Logo Edit screen is displayed. Refer to the preview at the upper part of the screen and edit the image data for
logo.When editing is done, click OK.
Settings are described below.
Item
Resize
Image width
Software User's Manual
Using the Printer Driver
Description
When checked, the image can be resized.
If the image size is bigger than the paper width and its size is not changed, any part that doesn't
fit the paper is cut off.
Setup the image size after resizing. (Unit : mm)
48