Epson TM-T20II Software User Manual page 44

Hide thumbs Also See for TM-T20II:

Table of Contents

TM-T20II Software Installer

Select a cut and paper feed method displayed in the Preset option list and click OK.

Select using the illustration of paper feed and cut displayed in Illustration for your reference.

Note:

❏ Feed: Paper is fed to the auto-cutter's cutting position after printing a document.

❏ No Feed: Paper is not fed after printing a document.

Customization of Paper Feed and Cut

Customization is possible, when no preset function is desired, such as specifying the amount of paper feed and

modifying the timing control.

Follow the steps below.

Select Custom from the list of Preset option.

Select the control timing from Detail option tab to setup the action.

Settings are described below.

Software User's Manual

Using the Printer Driver

Table of Contents

Show Quick Links

Table of Contents