Network (Lan) - D-Link SharePort Go III DIR-510L User Manual

Section 3 - Configuration
You can configure the local Network Settings for your router by going to Settings > Network (LAN).
From this screen you can also configure the DHCP Server settings. Refer to instructions for DHCP
Server on the next page.
NETWORK SETTINGS
Device IP Address: Enter the IP Address of the router. The default IP address
is 192.168.0.1.
If you change the IP address, once you click Save, you will
need to enter the new IP Address in your browser to get
back into the configuration utility.
Subnet Mask: Enter the Subnet Mask. The default subnet mask is
255.255.255.0.
Device Name: Enter a Device Name for the router.
Local Domain Name: Enter the Domain Name (Optional).
Enable DNS Relay: If you select Enabled, your computers will use the router
for a DNS server. Disable DNS Relay to transfer the DNS
server information from your ISP to your computers.
Click Save to save your settings.
D-Link DIR-510L User Manual

Network (LAN)

36