D-Link SharePort Go III DIR-510L User Manual page 133

Appendix B - Networking Basics
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Step 1
Click on Start > Control Panel > Network and Internet > Network and Sharing Center.
Windows® 7 -
Windows Vista® - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network
Connections.
Click on Start > Control Panel > Network Connections.
Windows® XP -
Windows® 2000 - From the desktop, right-click My Network Places > Properties.
Step 2
Right-click on the Local Area Connection which represents your network adapter and select Properties.
Step 3
Highlight Internet Protocol (TCP/IP) and click Properties.
Step 4
Click Use the following IP address and enter an IP address that is on the same
subnet as your network or the LAN IP address on your router.
Example: If the router´s LAN IP address is 192.168.0.1 or http://dlinkrouter.
local., make your IP address 192.168.0.X where X is a number between 2 and
Make sure that the number you choose is not in use on the network. Set the
Default Gateway the same as the LAN IP address of your router (I.E. 192.168.0.1
or http://dlinkrouter.local.).
D-Link DIR-510L User Manual
Assign a Static IP address
99.
129