D-Link SharePort Go III DIR-510L User Manual page 125

Section 6 - Troubleshooting
5. How do I add a new wireless client or PC if I have forgotten my wireless network name (SSID) or wireless encryption
key?
• If you have not changed your Wi-Fi settings from the factory defaults, you can use the information from the provided Wi-Fi
Configuration card to connect to the router.
• If you have changed your Wi-Fi settings, you should access the web-based configuration utility as described on page 9, and
complete the Setup Wizard again.
• Make sure you write down the settings displayed at the end of the Setup Wizard, so that you can enter them into each wirelessly
connected device.
6. Why won't the DIR-510L charge when I plug it in with the power adapter?
If you have attached one or more USB devices (such as a 2.5" US B drive) that draws a total of 0.7A or more power, the power adapter
will not supply enough voltage to charge the DIR-510L while simultaneously powering the USB devices. Check your USB devices'
power usage specifications and disconnect if necessary.
7. Why won't the DIR-510L power on when I plug it in?
Remove all USB devices from the DIR-510L and charge it before powering on.
D-Link DIR-510L User Manual 121