Connecting Your Equipment - D-Link SharePort Go III DIR-510L User Manual

Section 2 - Installation
Depending upon available resources, the DIR-510L can be set up from the device of your choice with Wi-Fi and a web browser.
Using Broadband Ethernet: You need an Ethernet cable connection
to your cable or DSL modem.
• Connect one end of an Ethernet cable to your modem and the
other end to the Internet port on the DIR-510L.
Using a 3G/4G USB Adapter: You need a compatible* 3G/4G USB
adapter with an active SIM card.
• Plug the 3G/4G USB adapter into the USB port on the DIR-510L.
*Note: Refer to the D-Link website for more information on compatible
3G/4G USB adapters.
Connecting to a Wi-Fi Hotspot: You need the Wi-Fi network name
and password of the hotspot you want to connect to.
D-Link DIR-510L User Manual

Connecting Your Equipment

3G/4G USB Adapter
Wi-Fi Hotspot
12