Download Print this page
Orion OLS-3201PGB User Manual

Orion OLS-3201PGB User Manual

Ols-pgb/p series
Hide thumbs Also See for OLS-3201PGB:

Advertisement

Quick Links

OLS-PGB/P Series
Ver. 1.0 E
OLS-PGB/P Series
User's Guide
1 of 33

Advertisement

loading

Summary of Contents for Orion OLS-3201PGB

  • Page 1 OLS-PGB/P Series Ver. 1.0 E OLS-PGB/P Series User’s Guide 1 of 33...
  • Page 2: Table Of Contents

    OLS-PGB/P Series CONTENTS Safety Instructions ------------------------------------------------------------------- 3-7. Introduction -------------------------------------------------------------------------- 8-10. Remote control ------------------------------------------------------------------------ 11. Viewing the Menus ---------------------------------------------------------------- 12-26. Specifications ----------------------------------------------------------------------- 27-32. EWF -------------------------------------------------------------------------------------- 33. 2 of 33...
  • Page 3: Safety Instructions

    OLS-PGB/P Series Safety Instructions Do not use a damaged or loose plug. This may cause electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause electric shock or fire. Use only a properly grounded plug and receptacle.
  • Page 4 OLS-PGB/P Series Do not disconnect the power cord while using the LCD Display. A surge may be caused by the separation and may damage the LCD Display. Do not use the power cord when the connector or plug is dusty. If the connector or plug of the power cord is dusty, clean it with a dry cloth.
  • Page 5 OLS-PGB/P Series Do not place the LCD Display face down. This may damage the TFT-LCD surface. The installation of the bracket must be done by a qualified professional. Installing the bracket by unqualified personnel may result in injury. Always use the mounting device specified in the owner's manual. When installing the product, make sure to keep it away from the wall (more than 10 cm / 4 inches) for ventilation purposes.
  • Page 6 OLS-PGB/P Series Do not install the product on an unstable, uneven surtace or a location prone to vibrations. Dropping the product may cause damage to the product or the person carrying it. Using the product in a location prone to vibrations mayshorten the lifetime of the product or may cause the product to catch fire.
  • Page 7 OLS-PGB/P Series Important Safety Instructions Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. Do not use this apparatus near water. 6. Clean only with dry cloth. 7.
  • Page 8: Introduction

    OLS-PGB/P Series Introduction LCD Display Manual User Manual CD Cable AC Power Cable HDMI Cable (Option) Other Remote Control Batteries (AAA X 2) 8 of 33...
  • Page 9 OLS-PGB/P Series Front 1. IR Aim the remote control towards this spot on the LCD Display. 2. LED LCD Power Status display(On : BLUE / Off : RED) 3. OSD KEY Input(Power / Menu / Source / Left / Right / Up / Down) a) Power : Turns the LCD Display On/ Off.
  • Page 10 OLS-PGB/P Series Rear 1. AC Power S/W On/Off. 2. AC Power In.(100V ~ 240V) 3. HDMI Out. 4. VGA Out. 5. DVI Out. 6. ESATA (2EA). 7. PS/2 Keyboard. 8. USB2.0 (6EA) 9. RJ45 LAN. 10. Audio Port.(Line-In / Line-Out / MIC-In) 11.
  • Page 11: Remote Control

    OLS-PGB/P Series Remote control 1. POWER: Turns the LCD Display On and Off & PC Power On and Off. 2. UP : Control the UP cursor in the menu 3, LEFT : Control the LEFT cursor in the menu 4, RIGHT : Control the RIGHT cursor in the menu 5, ENTER : Control the ENTER cursor in the menu 6, DOWN : Control the DOWN cursor in the menu 7.
  • Page 12: Viewing The Menus

    OLS-PGB/P Series Viewing the Menus ◆ Press the MENU button. The main menu is displayed on the screen. Its left side has five Text: Color, Image Setting, Position , OSD Meuu, Language, Misc., Audio and Exit. Changing the Color Standard Your television has several setting options that allow you to control the picture quality.
  • Page 13 OLS-PGB/P Series 3. Select the required mode by pressing the ▲ or ▼ button, then press the ENTER button. ◆ Contrast –Brightness– Color Adjust –Color Temp –Back ◆ Adjusts the Contrast and Brightness. 3-1. Select the required mode by pressing the ▲ or ▼ button, then press the ENTER button. ◀...
  • Page 14 OLS-PGB/P Series ◆ Adjust the Color. : It adjusts the intensity of the color. 3-3. Select the required mode by pressing the ▲ or ▼ button, then press the ENTER button. 3-4.Select the required mode by pressing the ◀ or ◀ button, then press the ENTER button. ◆...
  • Page 15 OLS-PGB/P Series ◆ Adjusts the Color Temp. 3-6. Select the required mode by pressing the ▲ or ▼ button, then press the ENTER button. ◀ ◀ button until you reach the optimal setting. 3-7. Press the ◆ 9300 – 6500 – 5800 - sRGB - USER ◆9300: This results in a blue tone.
  • Page 16 OLS-PGB/P Series 1. Press the MENU button to display the menu. 2. Press the ▲ or ▼ button to select Image Setting, then press the ENTER button. 3. Select the required mode by pressing the ▲ or ▼ button, then press the ENTER button. ◆...
  • Page 17 OLS-PGB/P Series ◆ Adjusts the Phase. 3-3. Select the required mode by pressing the ▲ or ▼ button, then press the ENTER button. ◀ ◀ button until you reach the optimal setting. 3-4. Press the ◆ Adjusts the Sharpness. 3-5. Select the required mode by pressing the ▲ or ▼ button, then press the ENTER button. ◀...
  • Page 18 OLS-PGB/P Series Changing the Position Standard 1. Press the MENU button to display the menu. 2. Press the ▲ or ▼ button to select Position, then press the ENTER button. 3. Select the required mode by pressing the ▲ or ▼ button, then press the ENTER button. ◆...
  • Page 19 OLS-PGB/P Series ◆ Adjusts the H.position and V.Position. 3-1. Select the required mode by pressing the ▲ or ▼ button, then press the ENTER button. ◀ ◀ button until you reach the optimal setting. 3-2 Press the 4. Press the EXIT button or Back Select to exit. Changing the OSD Menu Standard 1.
  • Page 20 OLS-PGB/P Series 3. Select the required mode by pressing the ▲ or ▼ button, then press the ENTER button. ◆ OSD H.Pos – OSD V.Pos – OSD Time –Back ◆ Adjusts the OSD H.Pos OSD V.Pos. 3-1. Select the required mode by pressing the ▲ or ▼ button, then press the ENTER button. ◀...
  • Page 21 OLS-PGB/P Series ◆ Adjusts the OSD Time. 3-3. Select the required mode by pressing the ▲ or ▼ button, then press the ENTER button. ◀ ◀ button until you reach the optimal setting. 3-4. Press the 4. Press the EXIT button or Back Select to exit. Changing the Language Standard 21 of 33...
  • Page 22 OLS-PGB/P Series 1. Press the MENU button to display the menu. 2. Press the ▲ or ▼ button to select Language, then press the ENTER button. 3. Select the required mode by pressing the ▲ or ▼ button, then press the ENTER button. ◆...
  • Page 23 OLS-PGB/P Series 1. Press the MENU button to display the menu. 2. Press the ▲ or ▼ button to select Misc., then press the ENTER button. 3. Select the required mode by pressing the ▲ or ▼ button, then press the ENTER button. ◆...
  • Page 24 OLS-PGB/P Series ◆ Reset 3-2. Select the required mode by pressing the ▲ or ▼ button, then press the ENTER button. ◆ Reset: You can return to the factory defaults settings 4. Press the EXIT button or Back Select to exit. Changing the Audio Standard 24 of 33...
  • Page 25 OLS-PGB/P Series 1. Press the MENU button to display the menu. 2. Press the ▲ or ▼ button to select Audio., then press the ENTER button. 3. Select the required mode by pressing the ▲ or ▼ button, then press the ENTER button. ◆...
  • Page 26 OLS-PGB/P Series ◆ Adjusts the Mute. ◀ ◀ button until you reach the optimal setting. 3-2. Press the 4. Press the EXIT button or Back Select to exit. Changing the Exit. 1. Select the required mode by pressing the ▲ or ▼ button, then press the ENTER button. ◆...
  • Page 27: Specifications

    OLS-PGB/P Series Specifications OLS-3201PGB Items Specifications Display Size 32 Inch (16:9) : LCD / S-PVA TFT Response Time 8 ms(Typ G to G) Pixel Size 0.51075(H) x 0. 51075 (V) mm Resolution 1366 x 768 (WXGA) Colors 8 bit, 16.7M Colors...
  • Page 28 OLS-PGB/P Series OLS-4001PGP Items Specifications Display Size 40 Inch (16:9) : LCD / S-PVA TFT Response Time 8 ms(Typ G to G) Pixel Size 0.46125(H) x 0. 46125 (V) mm Resolution 1920 x 1080 (WUXGA) Colors 8 bit, 16.7M Colors 40 inch Brightness 700cd/㎡...
  • Page 29 OLS-PGB/P Series OLS-4601PGP Items Specifications Display Size 46 Inch (16:9) : LCD / S-PVA TFT Response Time 8 ms(Typ G to G) Pixel Size 0.53025(H) x 0. 53025 (V) mm Resolution 1920 x 1080 (WUXGA) Colors 8 bit, 16.7M Colors 46 inch Brightness 700cd/㎡...
  • Page 30 OLS-PGB/P Series OLS-5501PGP Items Specifications Display Size 55 Inch (16:9) : LCD / S-PVA TFT Response Time 8 ms(Typ G to G) Resolution 1920 x 1080 (WUXGA) Colors 8 bit, 16.7M Colors 55 inch Brightness 700cd/㎡ (Typ) Contrast Ratio 3000:1 View Angle Hor.
  • Page 31 OLS-PGB/P Series OLS-7001PGP Items Specifications Display Size 70 Inch (16:9) : LCD / S-PVA TFT Response Time 8 ms(Typ G to G) Pixel Size 0.807(H) x 0. 807 (V) mm Resolution 1920 x 1080 (WUXGA) Colors 8 bit, 16.7M Colors 70 inch Brightness 600cd/㎡...
  • Page 32: Specifications

    OLS-PGB/P Series OLS-8201PGP Items Specifications Display Size 82 Inch (16:9) : LCD / S-PVA TFT Response Time 8 ms(Typ G to G) Resolution 1920 x 1080 (WUXGA) Colors 8 bit, 16.7M Colors 82 inch Brightness 600 cd/㎡ (Typ) Contrast Ratio 1200:1 View Angle Hor.
  • Page 33: Ewf

    OLS-PGB/P Series EWF (Enhanced Write Filter) Most of the characteristics of the XPE feature is to use the EWF. This is to protect the disk, as well as to protect the system files you can enjoy a twofer. The principle is simple. Jungle of the disk to the operating system and Overlay (RAM or Disk) and having the disk write When done, Overlay be made in writing is to create.