Pl Ii (Dolby Pro Logic Ii ) Music Parameter; Cs Ii (Circle Surround Ii) - Marantz R3001 User Manual

5. PL II (DOLBY PRO LOGIC II )
MUSIC PARAMETER
Pro Logic II-Music mode creates a rich and
enveloping surround ambience from stereo sources
such as CDs.
In this mode, SR3001 includes three controls to fi ne-
tune the soundfi eld as follows.
1. 3. 5. 2. 5.
4. 5.
D RECEIVER SR3001
SURROUND
DISP MULTI AUTO TUNED ST V – OFF NIGHT PEAK ATT ANALOG
DIGITAL
SLEEP AUTO SURR DIRECT DISC 6.1 MTX 6.1 EQ DIGITAL
L C R
AAC PCM LFE
SL S SR
SURROUND PURE SIMPLE
MODE DIRECT SETUP DISPLAY MEMORY CLEAR
EAKER
ENTER
AUTO HT-EQ MENU EXIT BAND T-MODE
ES
TV MAIN
4. 5.
VOL. SLEEP MUTE VOL.
OSD MENU
1. 3. 5.
ENTER
2. 5.
SET UP/ MENU OFF
T.TONE
PURE DIRECT AUTO DTS
1.
Select "5.PLII MUSIC PARAMETER" in SETUP
MENU with 3 or 4 cursor button.
2.
Press the ENTER button to enter the menu.
3. Press 3 or 4 cursor button to select a desired
item.
4. Press 1 or 2 cursor button to select the mode
or set the level.
5.
When you select "TO MAIN MENU" by pressing
the 3 or 4 button, you can return the SETUP
MENU by pressing the ENTER button.
Or press the 1 or 2 cursor button to select
"EXIT" then press the ENTER button to exit the
SETUP MENU.
PANORAMA:
Select the Panorama mode On or Off with 1 or 2
cursor button.
Panorama wraps the sound of the front left and right
speakers around you for an exciting perspective.
DIMENSION:
Set the Dimension level between 0 and 6 level in 1
level interval with 1 or 2 cursor button.
Adjust the soundfi eld either towards the front or
towards the rear.
This can be useful to help achieve a more suitable
balance from all the speakers with certain recordings.
22
C WIDTH:
Set the Center width level between 0 and 7 level in
1 level interval with 1 or 2 cursor button.
Center Width allows you to gradually spread the
center channel sound into the front left and right
speakers.
At its widest setting, all the sound from the center
is mixed into the left and right.
This control may help achieve a more spacious
sound or a better blend of the front image.
If "NONE" was selected for the Center speaker
setting in the Speaker size, then this setting will
not appear.
MENU STRUCTURE of PRO LOGIC II setup
DO
5. PRO LOGIC II
PARAMETER
PANORAMA
DIMENSION
C-WIDTH
TO MAIN MENU
exit SETUP

6. CS II (CIRCLE SURROUND II)

1. 3. 5.
4. 5.
D RECEIVER SR3001
DISP MULTI AUTO TUNED ST
SLEEP AUTO SURR DIRECT DISC 6.1
SURROUND PURE SIMPLE
MODE DIRECT SETUP
EAKER
AUTO HT-EQ MENU
ES
TV
4. 5.
VOL. SLEEP
DEFAULT
OSD
CUSTOM
1. 3. 5.
ENTER
OFF SET UP/
T.TONE
PURE DIRECT AUTO
1. Select "6. CS II" in SETUP MENU with 3 or 4
ON
cursor button.
0 6
2.
Press the ENTER button to enter this menu.
3.
Press 3 or 4 cursor button to select desired
0 7
item.
4. Press 1 or 2 cursor button to set the level.
EXIT
5.
When you select "TO MAIN MENU" by pressing
the 3 or 4 button, you can return the SETUP
MENU
MENU by pressing the ENTER button.
Or press the 1 or 2 cursor button to select
"EXIT" then press the ENTER button to exit the
SETUP MENU.
TRUBASS:
Set the TRUBASS level between 0 and 6 level in 1
level interval with 1 or 2 cursor button.
TRUBASS produced by the speakers to be an
octave below the actual physical capabilities of the
speakers adding exciting, deeper bass effects.
SRS DIALOG:
Set the SRS DIALOG level between 0 and 6 level
in 1 level interval with 1 or 2 cursor button.
This can be popped out of the surround audio
effects allowing the listener to easily discern what
the actors say.
If "NONE" was selected for the Center speaker
setting in the Speaker size, then this setting will
not appear.
MENU STRUCTURE of CS II setup
2. 5. 6.CS II setup
SURROUND
V – OFF NIGHT PEAK ATT ANALOG
DIGITAL DIGITAL
MTX 6.1 EQ
L C R
AAC LFE
PCM
SL S SR
DO
DISPLAY MEMORY CLEAR
ENTER
EXIT BAND T-MODE
MAIN
MUTE VOL.
MENU
2. 5.
MENU OFF
DTS
0 6
TRUBASS
SRS DIALOG 0 6
TO MAIN MENU EXIT
exit SETUP
MENU