Display Panel; Switch Panel - GBC PRO 3600 Instruction Manual

Display Panel

- Indicate that the machine is
READY
ready to laminate.
HOT - Indicate that the HOT function
is selected.
COLD - Indicate that the COLD function
is selected.
- Indicate that the heater is operating.
MEAS - Indicate that measure roller temperature function is selected.

Switch Panel

- Power ON/OFF the machine.
- Preset mode for hot lamination.
- Preset mode for cold lamination.
- Display current roller temperature (approx. 3 seconds).
- Reverse the revolution of the rollers to correct misfeeds.
- Stop/start the revolution of the rollers.
TEMPERATURE - Indicate the
temperature setting.
SPEED - Indicate the speed setting.
- Indicate that the roller is
moving in reverse revolution.
- Indicate that the roller is
moving in forward revolution.
- Indicate that the cooling fan is operating.
- Memory mode for saving frequent
use temperature and speed setting.
- These keys are used to increase or
decrease temperature ( 0~140°C).
- These keys are used to adjust the speed
(1~9) of the rollers. Speed 9 is the fastest
speed.